Hylomar Hylosil Series 101 Ivory Silicone 85g/3 Oz Tube

Hylosil® 100 Series Amine Curing (OEM proven)

• Wide operating temperature range -50 to +250ºC
• Permanently flexible
• Water and weather resistant
• Resistant to automotive fluids (not fuel)
• Engineering grade (no fillers or solvent added
  to reduce cost &/or performance)
• Ivory (White)
  
  Description:
  Hylosil 101 is a non-corrosive, low odour
  (when compared with Acetoxy based sealants),
  Room Temperature Vulcanising (RTV) silicone
  It is a high performance, engineering
  grade used in the automotive industry and for
  general manufacturing. It can also be used for a
  variety of applications and is particularly
  suitable for high strength applications.
  
  Hylosil 101 has good resistance to oils and aqueous
  anti-freeze agents. Unlike general-purpose silicone
  sealants, Hylosil 101 contains no solvents and does
  not give off acetic acid during cure.
  
  Instructions for Use:
  Ensure both surfaces to be bonded are dry and free
  from contamination such as oil or grease. Apply a
  bead directly onto one surface. Once applied,
  the joint should be assembled without delay.
  Care should be taken to ensure any excess
  compound does not extrude internally and foul any
  internal oil-ways or other channels and cause
  blockages. Any excess external product can be
  wiped away with a damp cloth.
  
  Typical Applications
  Due to its good resistance to oils, Hylosil 101 is ideal
  for use as a flexible gasket or flange sealant, for use
  in automotive and general engineering applications.